
SHANE EDE
Clock and Watch Repairs
Mechanical - Quartz - Hi grade - Complications -
Chronographs
Thanks for dropping by and letting me introduce myself.
My name is Shane Ede and I've been repairing watches for
over 30 years. Most of the work I've done has been for
dealers and serious hobbyists, and stores all over Canada,
but word of mouth via the Internet is getting me work from
all over the world now; send me your watch and you'll get it
back working and unscratched. I work on pretty anything that
ticks - mechanical, quartz, wristwatches, car clocks, pocket
watches. The only two things I don't do are fusee's and
Accutrons. Sorry.
You might not expect a guy that fixes mechanical watches
to be on the Internet and you'd be right. Somebody did this
website for me and I have no email. So, if you want to talk
to me why don't you phone me? My number is ++1.416.531.4201.
I'm in Eastern Time Zone and the best times to call are
between 9 am and 7 pm any day. If you call me you can get my
mailing address.
"How much to fix my watch?" is a very
difficult question to answer. First let me give you my rates
to clean and lubricate a watch:
- Time only (handwound) - $45
- High Grade time only (handwound) -
$85
- Time only (automatic) - $50
- High Grade time only (automatic) -
$100
- Chronographs - $125
- Repeaters - $175
|
NOTE that all prices listed are
in Canadian dollars.
A lot of times that's all some poor old thing off eBay
needs to make it work again. A lot of times I'll have
crystals in stock and they'll run $5 - $10. If I have to go
out and buy them they may cost more and things like Rolex
and Omega may cost up to $30 for a new crystal. I have many
watch parts in stock that I've accumulated over the years so
in some cases if you need a replacement part it's going to
be very cheap. I also have access to a very good supplier
and can get many parts I don't have in stock.
Please understand though that some parts are difficult or
impossible to obtain. While in general the older he watch
the harder it is to get parts for there really is no rhyme
or reason to all this; that is, I can get you a part for an
80 year old Bulova no problem, but a pusher for a 15 year
old Festina chronograph - well, you're on your own there,
you'll have to talk to Festina in Barcelona, Spain.
If you've guessed there isn't a lot of consistency to
what is available, you're right: Bulova - no problem. Elgin
- they're available but aren't cheap. Some Patek parts are
available, some Hamilton parts are not. I have a good supply
of Angelus parts and some IWC parts. Some parts for Gruens
are unavailable while others are around. If you need parts
you'd better give me a call before sending your watch. Note
that except in rare cases I don't sell parts. I need them to
do my work and as a rule do not sell just parts. Call me
anyway though, you never know. Sometimes we get very lucky
and find otherwise unobtainable parts in Europe - it
happens. I offer a one year warranty on my work. One last
thing I need to say about Rolex. While I've fixed thousands
of them there is a problem shipping them back to you if you
are in the United States. If the US customs knows it's a
Rolex they will send it back to me. They will not
confiscate it as the popular myth goes, and it's no
problem sending it to Canada, but it is problematical
returning it to the US. You have a couple of choices here.
We could try anyway - customs finds very few of them or you
could make an arrangement with somebody you trust in Toronto
to drive it over the border and mail it from there.
Daniel
Ho from TimeZone is one person you might contact.
Thanks for dropping by. I hope to be of service to you
one day.
Shane Ede

|